Swinging caliper, rear wheel, reconditioning
|
Swinging caliper, rear wheel, reconditioning
|
1.
|
Remove the brake pads, see Brake discs and pads, Adjustment and replacement.
|
2.
|
Remove the hydraulic body, see
.
|
3.
|
Clean the hydraulic body.
|
4.
|
Press out the brake piston by blowing compressed air through the hose connection.
Warning
|
Mind your fingers as the brake piston flies out.
|
|
|
|
|
|
5.
|
Remove the dust cap and piston seal.
|
6.
|
Check for damage due to wear.
|
1.
|
Lubricate the piston sealing ring with the grease supplied in the kit. Also pack the dust cap with grease.
|
2.
|
Fit the new piston seal in the brake cylinder's inner groove.
|
3.
|
Fit the dust cap over the brake piston.
|
4.
|
Press the dust cap's collar into the brake cylinder's outer groove.
|
5.
|
Press the piston into the brake cylinder by such an amount that the dust cap fastens in the brake piston's groove.
|
6.
|
Fit the brake pads, see Brake discs and pads, Adjustment and replacement.
|
7.
|
Fit the hydraulic body, see
.
|