SAAB WIS ONLINE

Wheel sensor, front left

Wheel sensor, front left

To remove



1. Unplug the connector.

2. Raise the car and remove the wheel.

3. Clean the area round the wheel sensor using a soft wire brush.

4. Undo the wheel sensor retaining bolt and remove the wheel sensor.


5. Remove the grommet and withdraw the lead.

6. Detach the lead from the clips and lift out the sensor.


To fit



1. Fit the wheel sensor in its holder and tighten the retaining bolt.

2. Insert the lead.

3. Push the lead into the clips and fit the grommet.

4. Fit the wheel, see Wheels , and lower the car.

Tightening torques

aluminium wheel 110 Nm (81 lbf ft)

steel wheel 50 Nm +2x90°, max. 110 Nm (37 lbf ft +2x90°, max. 81 lbf ft)

5. Plug in the connector.