Indicator lamp TCS OFF
Indicator lamp TCS OFF |
If a fault occurs in the TC/ABS system, the TCS OFF indicator lamp will be turned on via the P-bus. The warning lamp is also turned on when the system is disabled manually, which can be done at speeds below 60 km/h (37.5 mph) by pressing the TCS switch. The system can be engaged by pressing the TCS switch at any speed, whereby the TCS OFF lamp will go out again.
The lamp lights up when the ignition is switched on. If no fault is detected it goes out after 3-5 seconds.
Diagnostics
The ABS, brakes and central warning lamps will come on if there is a system fault that affects the ABS function.If the bus message from TC/ABS is absent for 2 seconds, the TCS OFF and ABS lamps will be turned on. If the bus message is absent for a further 8 seconds, the central warning lamp and the warning lamp for defective brakes will also come on.