Boot lid lock, 4D
| Boot lid lock, 4D |
| 1. |
Remove the trim from the inside of the boot lid.
|
|
| 2. |
Undo the three screws holding the lock.
|
|
| 3. |
Turn the clip securing the locking rod for the lock motor driver and detach the locking rod.
|
|
| 4. |
Remove the locking rod and the lock.
|
|
| 5. |
Transfer the locking rod to the new lock.
|
|
| To fit |
| 1. |
Position the lock and locking rod.
|
|
| 2. |
Fit the clip securing the locking rod for the lock motor driver.
|
|
| 3. |
Screw on the lock.
|
|
| 4. |
Fit the trim on the inside of the boot lid.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
