SAAB WIS ONLINE

Rear door handle

Rear door handle

Removing



1. Open the door.

2. Remove the cover around the window frame.

3. Remove the door trim.

4. Remove the water separator using 82 93 474 Removal tool .

5. Remove the nuts and plate from the back of the handle.

6. Remove the three screws holding the lock unit.


7. Lower the lock unit slightly so that the push rod falls out.

8. Lift out the handle.


Fitting



1. Put the handle in place.

2. Fit the plate and tighten the handle nuts.

3. Guide the push rod into the lock unit and position it in the door.


4. Screw on the lock unit.

5. Refit the water separator, door trim and cover around the window frame.