SAAB WIS ONLINE

Tailgate lock, 5D

Tailgate lock, 5D

To remove



1. Open the tailgate.

2. Remove the frame around the inner door handle by prising with a screwdriver in the three recesses. Once the frame clips have been released, pull the frame down and bend it out.

3. Remove the inner tailgate trim by removing the door pull retaining screws and the plastic clips in the trim.

4. Lift off the tailgate trim as described below:


4.a. Pull down the top of the trim to release it from the clips.

4.b. Pull back on the trim to release the guide pin at the door pull, taking care not to break it.

5. Remove the three lock rods attached with clips to the lock.


6. Unscrew the four lock retaining bolts.

7. Remove the lock and unplug the connector.


To fit



1. Plug in the connector and position the lock. Screw it on with the four bolts.

2. Fit the lock rods to the lock.

3. Fit the inner trim by inserting the guide pin at the door pull and fastening with the clips at the edge of the window. Screw in the two door pull screws. Fasten the remaining clips around the trim.


4. Fit the frame around the inner door handle.