Luggage compartment trim, side trim, 5D
|
Luggage compartment trim, side trim, 5D
|
1.
|
Lift off the cover over the storage compartment and lift out the storage box.
|
2.
|
Remove the scuff plate, 2 covers, screws and clips.
|
3.
|
Detach the rear edge of the roof covering so that clearance for the D-pillar trim is obtained.
|
4.
|
Remove the D-pillar trim, fastened with clips.
|
5.
|
Remove the parcel shelf support, 1 cover and 3 screws.
|
6.
|
Remove the side bolster by first pulling the upper edge to release the catch. Then unhook the lower edge.
|
7.
|
Remove the 5 screws securing the top of the side trim.
|
8.
|
Fold out the side trim and unplug the connector for the CD player, if fitted.
Lift out the side trim.
|
1.
|
Lift the side trim into place.
Plug in the connector for the CD player, if fitted.
|
2.
|
Fit the screws securing the top of the side trim, starting with the rearmost screw so that the trim will be properly located.
|
3.
|
Fit the side bolster by first hooking in the lower edge. Then press the upper catch into place.
|
4.
|
Fit the parcel shelf support, 3 screws and 1 cover.
|
5.
|
Fit the D-pillar trim, secured with clips. Press the rear roof covering into place.
Adjust the weatherstrip over the edges of the D-pillar trim and roof covering.
|
6.
|
Fit the scuff plate, clips, 2 covers and screws. Adjust the position of the weatherstrip over the scuff plate.
|
7.
|
Lift the storage box into place and fit the cover.
|