Engine block
| Engine block |
| Cylinder bore |
|
Classification codes
|
|
|
|
8
|
mm
|
83.975-83.985
|
|
99
|
mm
|
83.985-83.995
|
|
00
|
mm
|
83.995-84.005
|
|
01
|
mm
|
84.005-84.015
|
|
02
|
mm
|
84.015-84.025
|
The engine must be marked with the new cylinder classification after machining and reboring.
| Cylinder block |
|
Height, new cylinder block
|
mm
|
242.2
|
| Cylinder head |
|
Height, new cylinder head
|
mm
|
140
|
| Control values, pressure |
|
Compression
|
bar
|
27-29
(Difference between cylinders must not exceed 100 kPa.) |
|
Compression ratio
|
19.5:1
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
