Rear crankshaft seal
Rear crankshaft seal |
To remove |
1. |
Remove the clutch, see
Changing clutch assembly.
|
2. |
Remove the flywheel.
|
3. |
Remove the rear crankshaft seal using
83 95 733 Removal tool, rear crankshaft seal
.
|
To fit |
1. |
Fit the rear crankshaft seal using
83 95 790 Fitting tools, rear crankshaft seal
. Check the distance between the rear end surfaces of the rubber seal, which should be 3.2 - 3.8 mm.
|
2. |
Fit the flywheel. Tighten the bolts alternately.
Tightening torque: 118 Nm (87 lbf ft) |
3. |
Fit the clutch, see
Changing clutch assembly
.
|