Sheet metal oil sump
Sheet metal oil sump |
To remove |
1. |
Raise the car and remove the lower engine cover.
|
2. |
Loosen the oil plug and drain the oil from the engine.
|
3. |
Remove the sheet metal oil sump and clean the seal faces of the sump and engine.
|
To fit |
1. |
Fit the sheet metal sump. Apply a 2 mm bead of flange sealant 87 81 841 on the sump's seal face.
Tightening torque: 9 Nm (7 lbf ft) |
2. |
Fit the oil plug with a new gasket.
|
3. |
If needed, change the oil filter. See...
|
4. |
Fit the lower engine cover.
|
5. |
Top up with engine oil. See
Lubrication, lubricants
|