Valve stem seals, to fit
| Valve stem seals, to fit |
(Cylinder head removed, camshafts and tappets removed)
| 1. |
Fit the seals with tool 83 95 071.
Place the seal in the tool and then insert the tool in the valve guide. If the valve is fitted in place, use the valve stem as a guide.
|
|
| 2. |
Tap the seal into position using a plastic mallet and remove the plastic sleeves.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
