Bleeding the cooling system, V6
|
Bleeding the cooling system, V6
|
Note
|
A/C or ACC must be OFF.
|
1.
|
Fill the system to MAX with Saab Original Coolant, part no. 400 131 389 (1 litre), 400 131 397 (4 litres) and close the expansion tank cap.
|
2.
|
Start the engine and run it unloaded at varying speeds until the radiator fan starts. Check the return flow to the expansion tank.
|
3.
|
Open the expansion tank cap and top up the coolant to the MAX marking.
|
4.
|
Close the expansion tank cap and run the engine at varying rpm until the radiator fan starts three more times.
|
5.
|
Switch off the engine and top up as necessary to the MAX level.
|
6.
|
Raise the car and check for any fluid leaks.
|