Evaporative emission canister
|
Evaporative emission canister
|
2.
|
Remove the right-hand front wheel.
|
3.
|
Remove the wing liner from the wheel housing. Press in the plastic liner and bend it down to remove it.
|
4.
|
Remove the evaporative emission canister by unhooking it from its mounting.
|
5.
|
Mark and remove the two connected hoses. Hose A is connected to the tank and hose B to the purge valve.
|
1.
|
Connect the hoses and fit the EVAP canister
|
2.
|
Fit the wing liner.
|
3.
|
Fit the wheel.
Tightening torque 110 Nm (81 lbf ft)
|
4.
|
Lower the car to the floor.
|