Fuel filter/fuel heater, V6
Fuel filter/fuel heater, V6 |
|
Important | ||
Be particulary observant regardning cleanliness when working on the fuel system. Loss of function may occur due to very small particles. Prevent dirt and grime from entering the fuel system by cleaning the connections and plugging pipes and lines during disassembly. Use 82 92 948 Plugs, A/C system assembly. Keep components free from contaminants during storage. |
||
To remove |
1. |
Raise the car.
|
2. |
Drain the fuel filter to avoid unnecessary spill, see
Draining the fuel filter
.
|
3. |
Remove the feeder line using the removal tool
83 95 261 Tool, fuel line
.
|
4. |
Remove the filter holder by pressing it up and out of the bracket on the fuel tank.
|
5. |
Detach the preheater connector from the filter holder.
|
6. |
Detach the inlet hose from the tank.
|
7. |
Unscrew the filter holder cap.
|
8. |
Remove the filter.
|
To fit |
1. |
Insert the filter.
|
2. |
Screw on the filter holder cap.
|
3. |
Fit the inlet hose to the tank.
|
4. |
Fit the preheater connector to the filter holder.
|
5. |
Fit the filter holder by hooking it to the bracket on the fuel tank.
|
6. |
Fit the feeder line.
|
7. |
Lower the car to the floor.
|
8. |
Bleed the fuel system, see
Bleeding the fuel system
.
|