P0070
Read the instructions below then start the fault diagnostic procedure.
Symptom: Incorrect outdoor temperature shown.
| P0070 |
Fault symptoms
| • |
Incorrect outdoor temperature shown.
|
|
Conditions
The following conditions apply for this DTC:| • |
A DTC is generated 10 seconds after the outdoor temperature sensor (SID) has been reported as faulty via the bus.
|
|
Diagnostic help
In the event of intermittent faults, the DTC is shown only in PSG16Refer to fault diagnosis for SID. Read any SID DTCs.
| Note | ||
|
A fault in the control module female connector can cause a trouble code. Check the contact for a bent pin, oxidation and tightness of pins. See Difficult faults in PSG16 despite trouble code |
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
