SAAB WIS ONLINE

P1106

Read the instructions below then start the fault diagnostic procedure.

Symptom: CHECK ENGINE lamp on. Limp home. Loss of performance. Cruise control does not work.

P1106


Atmosphere Pressure Sensor Circuit. Plausibility Fault with Manifold Absolute Pressure


Fault symptoms


CHECK ENGINE lamp on.

Limp home.

Loss of performance.

Cruise control does not work.


Conditions

The following conditions apply for this DTC:


When the difference between the values from the boost pressure sensor and atmospheric pressure sensor is greater than 22.5 kPa for more than 3 seconds. Diagnosis is active at engine speeds below 950 rpm and 15mg/combustion.

Fault criteria not fulfilled for P0107, P0108, P1107, P1108, P1634, P1635, P1636 or P1637.


Diagnostic help

For more information, refer to Menu "Read values" boost pressure sensor and atmospheric pressure sensor.


DTC P0106 generated simultaneously in the control module. Boost pressure control and EGR control are deactivated. Diagnosis for P0107, P0108, P1107 and P1108 is switched off.

Default value of 70 kPa. Has the same power supply as pedal position sensor 2.