P1610, P1614
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Engine does not start, no cranking.
CHECK ENGINE lamp on.
P1610
Immobilizer Code not programmed
P1614
Wrong Transponder response from TWICE
Fault symptoms
|
•
|
Engine does not start, no cranking.
|
Conditions
The following conditions apply for this DTC:
|
•
|
P1610:
Control module in delivery mode. Ignition in start position.
|
|
•
|
P1614:
Code exchange between TWICE and PSG 16 incorrect. Ignition switch in start position.
|
Diagnostic help
P1614:
Can be caused by a faulty transponder or absence of a transponder
