P1263

Read the instructions below then start the fault diagnostic procedure.

Symptom: Engine stalls.

P1263

Fault symptoms

•	Engine stalls.

On-Board Diagnostics

Type of diagnosis:

-	Continuous. But interrupted when fault criteria fulfilled and will not restart until next driving cycle.

Enable criteria:

-	Engine running for at least 5 s. No vehicle speed.

Fault criteria:

-	Throttle motor receiving 100% PWM in closing direction.

Dependents:

-

None.

System reaction to a fault:

-	Fuel shut-off.

OK report:

-	Accelerator pedal has been depressed at some time and then fully released. 120 s has expired since then without fault criteria being fulfilled.

Fault handling: (See section Fault handling III, other emission-related components and functions for more information.)

-	Type III. CHECK ENGINE does not go on.

Diagnostic help

This trouble code does not indicate a fault but is for information only. Avoid touching the throttle arm. If it is necessary to increase the engine speed while working on the engine, the throttle arm must be rotated instead.