P1460
Read the instructions below then start the fault diagnostic procedure.
Symptom: Engine will not start.
P1460 |
Fault symptoms
• |
Engine will not start.
|
On-Board Diagnostics
Type of diagnosis:- |
Continuous. But interrupted when fault criteria fulfilled and will not restart until next driving cycle.
|
Enable criteria:
- |
Ignition ON
|
Fault criteria:
- |
Immobilizer code from TWICE incorrect or missing.
|
Dependents:
- |
None.
|
System reaction to a fault:
- |
Fuel shut-off.
|
OK report:
- |
Enable criteria fulfilled. Fault criteria not fulfilled within 60 s.
|
Fault handling: (See section Fault handling III, other emission-related components and functions for more information.)
- |
Type III. CHECK ENGINE does not go on.
|
Diagnostic help
Fault diagnosis concerns unprogrammed transponder or unprogrammed immobilizer code in TWICE.Functions in the diagnostic tool related to the fault:
• |
Group FUEL CUT, reading: Trouble Code Detected, unit ON/OFF
|
See also the description of readings under Menu "Read Values" for more information.
Note | ||
Program immobilizer code in TWICE after fitting new control module (Trionic T7, TWICE or MIU). |