SAAB WIS ONLINE

Car will not start.

Read the instructions below then start the fault diagnostic procedure.

Symptom: Car will not start.

Car will not start.



Fault symptoms

Car will not start.

Conditions

The following conditions apply for the current fault symptom:


No diagnostic trouble codes in the car with the current symptom description.

Petrol in the tank.

Starter motor in order.


Diagnostic help

Most functions that can stop the engine from starting are monitored by self-diagnosis and therefore generate diagnostic trouble codes if they malfunction. This fault diagnosis therefore applies to faults that are not monitored but can prevent the engine from starting.

The fuel pump is checked first to see that it is working and delivering pressure. Then, the ignition discharge module and spark plugs are checked.

Functions in the diagnostic tool related to the fault:


Activate fuel pump relay.

Activating ignition triggers.


See also the description of activations under ”Fault diagnosis, general” for more information.

Checking the wiring

Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits. Observe the multimeter, diagnostic tool or test lamp during the check.