SAAB WIS ONLINE

Control valve, V6

Control valve, V6

To remove


1. Remove the protective cover from the engine harness connector.

2. Unplug the connector on the boost pressure control valve.


3. Remove the boost pressure control valve.

4. Remove the vacuum hoses to the diaphragm unit and vacuum pump from the boost pressure control valve.


To fit


1. Fit the boost pressure control valve.

Tightening torque 4 Nm (3 lbf ft)


2. Remove the vacuum hoses to the diaphragm unit (2A) and vacuum pump (2B).

3. Plug in the boost pressure control valve.

4. Fit the protective cover over the engine harness connector.