SAAB WIS ONLINE

Solenoid valve, charge air 4-cyl (179a)

Solenoid valve, charge air 4-cyl (179a)

To remove


1. Remove the protective cover over the engine harness connector.

2. Unplug the control valve connector.


3. Remove the boost pressure control valve.

4. Detach the vacuum hoses from the control valve.


To fit


1. Fit the boost pressure control valve.


Tightening torque 4 Nm (3 lbf ft).

2. Connect the vacuum hoses to the control valve:

2A: To turbo diaphragm unit

2B: To vacuum pump (YELLOW)

3. Plug in the control valve connector.


4. Fit the protective cover over the engine harness connector.