Light cluster in boot lid 4D

/ 9-5 (9600) / 2002 / 3. Electrical System / Lighting and signalling systems / Adjustment/replacement / Light cluster in boot lid 4D

To remove

1.	Remove the handle.

2.	Remove the trim.

3.	Remove the numberplate.

4.	Remove the decor panel.

5.	Remove the lamp holder.

6.	Remove the nuts securing the light cluster.

7.	Remove the light cluster by depressing the catches.

To fit

1.	Position the light cluster and press it home.

2.	Fit the retaining nuts securing the light cluster.

3.	Fit the lamp holder into the light cluster.

4.	Fit the decor panel.

5.	Fit the numberplate.

6.	Fit the trim.

7.	Fit the handle.

Replacement of lamp bulb

1.	RH: Remove the handle.

2.	Remove the trim on the side in question.

3.	Remove the lamp holder.

4.	Remove and change bulb.

5.	Fit the bulb holder.

6.	RH: Fit the handle.

7.	Fit the trim.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.