Control module (SID)
Control module (SID) |
To remove |
1. |
Remove the main unit (audio) or radio.
|
2. |
Press out the SID from behind.
|
3. |
Undo the connector on the SID.
|
To fit |
1. |
Plug in the connector to the SID.
|
2. |
Slide in the SID.
|
3. |
Refit the main unit (audio) or radio.
|
4. |
When changing the SID unit, the parts must be programmed. Follow the instructions in the diagnostic tool menu "Programming".
|
Lamp bulbs |
Note | ||
It is recommended to replace all the bulbs in the SID unit at the same time as they all have the same life expectancy. |
1. |
Remove the SID unit as described under
|
2. |
Open the cover.
|
3. |
Replace the bulbs, 4+2.
|
4. |
After changing the SID unit, the parts must be programmed. Follow the instructions in the diagnostic tool menu "Programming".
|