B1605
Read the instructions below then start the fault diagnostic procedure.
Symptom: Certain functions or all functions stop working.
| B1605 |
Control module fault
Fault symptoms
Certain functions or all functions stop working.Condition
Components inside the control module are faulty.Check the wiring harness
Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits. Check switches, connectors and crimp connections for oxidation, withdrawn pins and pin clamping force.This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
