Wiring harness, front bumper

/ 9-5 (9600) / 2002 / 3. Electrical System / Wiring harness / Adjustment/replacement / Wiring harness, front bumper

Removal

1.	Remove right-hand direction indicator and headlamp .

2.	Unplug the 6-pin connector for the bumper wiring harness at the A/C pipe.

3.	Raise the car.

4.	Remove the spoiler shield screws. Bend down the lower section of the bumper shell and remove the spoiler shield.

5.	Detach the connector housings to the outside temperature sensor and any fog lights.

6.	Remove the wiring harness.

Refitting

1.	Fit the wiring harness.

2.	Attach the connector housings to the outside temperature sensor and any fog lights.

3.	Fit the spoiler shield by guiding the shield in towards the bumper shell. Fit the screws.

4.	Lower the car.

5.	Assemble the 6-pin connector.

6.	Fit right-hand direction indicator and headlamp .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.