"Activate" menu

"Activate" menu

Note
When a system function is activated with the diagnostics tool, the control module executes a command which is not normal from a functional point of view. In activation mode the diagnostics tool checks the control module and the activation command should therefore be used with discrimination. An activated function will always be reset when you leave the activation mode and continue in the diagnostics tool's menu.
Always clear any diagnostic trouble codes that may have been generated in the transmission system or any other system when you have finished your work.

Important
Activation mode can only be entered in selector lever position N. In other selector lever positions the diagnostics tool's display will show SHIFT TO N AND THEN PRESS ENTER. All activation commands can be cancelled by pressing Exit.

Activate	Condition Activation	Description	Usage
Solenoid S1	Ignition ON	The control module activates solenoid S1	If in working order the solenoid will click. A stethoscope should be used.
Solenoid S2	Ignition ON	The control module activates solenoid S2	If in working order the solenoid will click. A stethoscope should be used.
Solenoid S3	Ignition ON	The control module activates solenoid S2	If in working order the solenoid will click. A stethoscope should be used.
Solenoid S4	Ignition ON	The control module activates solenoid S2	If in working order the solenoid will click. A stethoscope should be used.
Solenoid S5	Ignition ON	The control module activates solenoid S2	If in working order the solenoid will click. A stethoscope should be used.
Solenoid SLS	Ignition ON	The control module activates solenoid SLS with a 300 Hz PWM signal	If functioning correctly the active solenoid will buzz quietly. Use a stethoscope.
Solenoid SLU	Ignition ON	The control module activates solenoid SLU with a 300 Hz PWM signal	If functioning correctly the active solenoid will buzz quietly. Use a stethoscope.
Solenoid SLT	Ignition ON	The control module activates solenoid SLT with a 300 Hz PWM signal	If functioning correctly the active solenoid will buzz quietly. Use a stethoscope.
Reset Adaption	Ignition ON
SPORT Lamp	Ignition ON
WINTER Lamp	Ignition ON
CHECK GEARBOX Lamp	Ignition ON
MIL Request	Ignition ON