Bleeding the clutch hydraulic system in the car
|
|
Bleeding the clutch hydraulic system in the car
|
For bleeding the slave cylinder, refer to
Bleeding the slave cylinder
|
1.
|
Unscrew the cover from the brake fluid reservoir.
|
|
2.
|
Top up the brake fluid in the reservoir as necessary.
|
|
3.
|
Undo the bleed nipple.
|
|
5.
|
Connect compressed air to the bleeding tool and bleed the clutch until clear fluid runs from the nipple.
|
|
6.
|
Tighten the bleed nipple and remove the bleeder tool.
|
|
8.
|
Hold the brake bleeder hose to the nipple and bleed the reservoir for about 1 minute or so long as bubbles rise to the surface.
|
|
9.
|
Check clutch operation and top up brake fluid to the correct level.
|
|
10.
|
Refit all components.
|
