(521-2324) Tightening the brake pipes
MODIFICATION INSTRUCTION | |
Bulletin Nbr: | 521-2324 |
Date: ........... | December 2001 |
Market: | Enligt lista |
Tightening the brake pipes |
Service Campaign 157 07 |
Cars in stock must be rectified before delivery.
Cars already delivered must be rectified in connection with a scheduled visit to the garage for service or repairs.
Cars affected |
Saab 9-5 MY02 within VIN range 23005988-23011696.
Background |
The brake pipes to the rear wheels may have been insufficiently tightened to the ABS unit, due to incorrect settings on the machine.
This problem has been rectified on some cars within the VIN range, independent of this service campaign. In these cases, the brake pipes have been marked with yellow paint.
Procedure |
Examine box B5 on the modification identity plate and check for any paint marks on the brake pipes before proceeding. Continue as follows if the box is not marked or if the brake pipes are not marked with yellow paint.
1. |
Tighten the brake pipe nipple for the right-hand connection on the rear of the ABS unit.
Tightening torque 16 Nm (12 lbf ft) |
2. |
Tighten the brake pipe nipple for the left-hand connection on the rear of the ABS unit.
Tightening torque 16 Nm (12 lbf ft) |
Marking the modification identity plate |
Mark box B5 on the modification identity plate after completing this procedure. If the work was carried out by the importer, mark the box with a "7". If done by a dealer, mark it with an "8".
Time/Warranty information |
See separate information.