The lamp for ESP operative does not light

Read the instructions below then start the fault diagnostic procedure.

Symptom: When the ignition is turned on, a bulb test is performed. The lamp for ESP operative should come on for 3 seconds. The ESP lamp does not come on.

The lamp for ESP operative does not light

Fault symptoms

When the ignition is turned on, a bulb test is performed. The lamp for ESP operative should come on for 3 seconds. The ESP lamp does not come on.

Conditions

Bus communication must be functioning. See System overview .

Diagnostic help

The ESP indicator lamp can be activated with the diagnostic tool.

-	Select “Activate”.

-	Select “ESP Lamp”