(850-2343) Replacement of airbag control module (SRS) with incorrect software
MODIFICATION INSTRUCTION | |
Bulletin Nbr: | 850-2343 |
Date: ........... | MarsĀ 2002 |
Market: | Enligt separat lista |
Replacement of airbag control module (SRS) with incorrect software |
Customer satisfaction campaign 154 10 |
Cars in stock must be remedied before delivery.
A personal communication must be sent to the owners of cars already delivered requesting them to get in touch with the nearest Saab garage as soon as possible to have the fault rectified.
Cars affected |
Saab 9-5 M02 with VIN within the interval 23017704 - 23021786 and equipped with SRS control module with one of the following serial numbers:
1480006
1490122 2390492 2400058 2400094 2400234 2420030 2420034 2420076 2420271 2460195 2460363 2460365 2490144 2490153 2490251 2490256 2500171 2530121 2530380 2600255 2600260 2600266 2600292 |
2600345
2600348 2630121 2690178 2830137 2830264 2840022 2840066 2840129 2840188 2840255 2840274 2840282 2850095 2880335 2890015 2890291 2890305 2890328 2890346 2910165 2950181 2960293 2970082 |
2970083
3020005 3020009 3020066 3020400 3020457 3020511 3030414 3040080 3040152 3040154 3040252 3040382 3040431 3050141 3050166 3050196 3060097 3060110 3060126 3090089 3090101 3090103 3090110 |
3090111
3090114 3090121 3090123 3090126 3090129 3090135 3090146 3090150 3090152 3090166 3090170 3090172 3090189 3090190 3090209 3090210 3090216 3090221 3090329 3090376 3100003 3100007 3100024 |
3100180
3100194 3100215 3100224 3100230 3100236 3110025 3110039 3110045 3110053 3110054 3110057 3120080 3120082 3120085 3120087 3120093 3120094 3120100 3120102 3120146 3130001 3130002 3130010 |
3130011
3130012 3130018 3130025 3130032 3130104 3130180 3130224 3160028 3160129 3160202 3180008 3180154 3180157 3180189 3180193 3180195 3180199 3180203 3180204 3180208 3180209 3180211 3180213 |
3180214
3180215 3180216 3180219 3180220 3180221 3180223 3180226 3180230 3180232 3180233 3180234 3180236 3180240 3180241 3180242 3180244 3180245 3180247 3180248 3180252 3180254 3180258 3180260 |
3180262
3180264 3180265 3180270 3180271 3180273 3180274 3180276 3180277 3180280 3190095 3200046 3230024 3230058 3230065 3230067 3230155 3230255 3240101 3250053 3250065 3250078 3250102 3250103 |
3250104
3250105 3250106 3250109 3250112 3250193 3250200 3250223 3250263 3260002 3260006 3260015 3260038 3260117 3260120 3260224 3260239 3270126 3270127 3270134 |
Background |
The SRS control module of certain cars is incorrectly programmed.
Parts required |
50 44 839 SRS control module.
Procedure |
Inspect box D1 of the modification identity plate before proceeding. New modification indentity plate must be fitted as described in SI 801-2332. Continue as follows if the box has not been marked.
1. |
If necessary, remove the cup holder in the centre console.
|
2. |
Use removal tool, part no. 82 93 474, and insert the tool right under the upper portion of the centre console's back section. Press the back section up to open the lock.
|
3. |
Lift up the console's back section and move it to the side so that the SRS control module is visible.
|
4. |
Using a torch, read the serial number on the label located on the top of the SRS control module.
|
5. |
Check the last 7 digits of the bottom row (The row of numbers closest to the front).
|
Marking the modification identity plate |
Upon completion of the procedure, mark box D1 of the modification identity plate (a new, additional modification identity plate is required, see SI 801-2332). If the procedure was carried out by the importer, mark the box with a "7"; if it was carried out by the dealer, mark the box with an "8".
Time/Warranty information |
See separate information.