Outside handle, tailgate 4D

/ 9-5 (9600) / 2002 / 8. Body / Doors and locks / Adjustment/replacement / Outside handle, tailgate 4D

To remove

1.	Remove the number plate.

2.	Open the boot lid.

3.	Remove the decor panel retaining nuts and remove the decor panel.

4.	Remove the LH lamp cluster by removing the retaining nuts and pressing the lamp clips inwards.

5.	Undo the 4 opening handle bolts.

6.	Remove the opening handle.

7.	Separate the connector.

8.	Remove the opening handle.

To fit

1.	Fit the opening handle.

2.	Plug in the connector.

3.	Fit the 4 opening handle bolts.

4.	Fit the LH lamp cluster. Screw on the lamp retaining nuts.

5.	Fit the decor panel by means of the retaining nuts.

6.	Close the tailgate.

7.	Fit the number plate.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.