Front protective moulding
|
Front protective moulding
|
1.
|
Remove the number plate, if fitted.
|
3.
|
First remove the corner decor mouldings by carefully inserting the tool under the corner of the moulding. Then pull the clips from the bumper shell.
|
4.
|
Carefully insert the tool under the corner of the centre-most moulding.
|
5.
|
Carefully pull the clips from the bumper shell.
|
1.
|
Fit the protective moulding by using the guide lug to position it correctly.
|
2.
|
Press in the moulding.
|
3.
|
Fit the corner mouldings by using the guide lug to position them correctly.
|
4.
|
Make sure that all clips are secure in the bumper shell.
|
5.
|
Fit the number plate, if fitted.
|