SAAB WIS ONLINE

Trim, tailgate, 5D

Trim, tailgate, 5D

To remove



1. Open the tailgate.

2. Remove the 3 window covers (fastened with clips).

3. Remove the clips at sides and bottom.

4. Prise out the opening handle frame using a screwdriver inserted in the three recesses. When the frame's clips have released, pull the frame downwards and bend it out.

5. Undo the closing handle retaining screws. The handle will remain in place in the trim.

Note

There is a locating pin beside the handle. When removing the trim, take care to avoid breaking the pin.


6. Remove the lamps and allow them to hang from their wiring.

7. Pull the top of the trim so that the clips come away.


8. Remove the pin from its hole by moving the trim slightly downwards. Lower the trim, making sure that the lamps pass out through their respective openings.


To fit



1. Insert the locating pin in its hole and move the trim upwards, making sure that the lamps pass through their respective openings.

2. Press the upper part of the trim into place.

3. Press the lamps into the trim.

4. Fit the screws securing the closing handle.

5. Fit the opening handle frame by hooking the lower clips into place and then pressing the frame home so that the remaining clips engage.

6. Fit the clips at sides and bottom.

7. Fit the window covers.

8. Close the tailgate.