Bumper, scratches
Bumper, scratches |
1. |
Wash the part with Teroson FL cleaner.
|
2. |
Sand the damaged area with a low speed grinder and abrasive paper (80 - 120). Continue with abrasive paper 180 - 200.
|
3. |
Rub the edges with abrasive paper 240 - 320.
|
4. |
If the scratch is deep, sand the edges smooth.
|
5. |
Mask the area surrounding the damage.
|
6. |
Spray with Terokal primer 150. Allow to dry for 10 - 15 minutes until the surface is completely mat.
|
7. |
Fill with Terokal 9225. Allow to dry for two hours.
|
8. |
Sand with a low speed machine, 180 abrasive paper. Continue with 240 paper and then 320 paper. Finish off with 500 paper.
|
9. |
Apply a new, thin layer of Terokal primer 150. Any pores or small scratches can be filled with Standox Stando-soft-feinplastic, max. 1.0 mm thick.
|
10. |
Paint as directed by the paint manufacturer.
|