SAAB WIS ONLINE

Oil pressure measurement

Oil pressure measurement

To remove


1. Raise the car.

2. Remove the lower engine cover.


3. Detach connector of the oil pressure switch and remove the oil pressure sensor.

4. Fit the quick-release coupling from Kit, pressure gauge 8791600 and connect the manometer. Make sure that the coupling is fitted correctly and that the hose is not damaged or placed against warm components.

5. Lower the car.

6. Start the engine and release the pressure following specifications. See Lubricating system

7. Raise the car.

8. Remove the pressure measurement equipment. Clean up any oil spillage with a rag.


To fit


1. Fit the oil pressure sensor and attach the connector.


2. Wipe up any oil spillage.

3. Fit the lower engine cover and lower the car.