SAAB WIS ONLINE

Valve gear, to remove

Valve gear, to remove

(Cylinder head removed)

Important

The cylindrical surfaces round the valve springs constitute sealing surfaces for the tappets. These surfaces must not be scratched.

The camshafts must come away from the bearing seats evenly.



1. Remove the camshaft bearing caps by undoing the bolts in steps of 1/2 to 1 turn. It is important to conclude removal at the bearing cap where the tappets are under load. Lift out the camshafts and remove the stuffing boxes. Note the marking.


2. Remove the tappets and keep them in the 83 93 787 Valve rack to avoid mixing them up.

3. Insert protective sleeves, part No. 83 95 022.

4. Depress the valve heads using valve spring compressor 83 95 246 and remove the tappets.


5. Lift out the spring caps and the valve springs. Lift out the washers and valve guide seals with Pliers 83 94 157

6. Remove the valves and keep them in the 83 93 787 Valve rack to avoid mixing them up.