P0562

Read the instructions below then start the fault diagnostic procedure.

Symptom: CHECK ENGINE.

P0562

Fault symptoms

•	CHECK ENGINE.

On-Board Diagnostics

Type of diagnosis:

-	Continuous.

Enable criteria:

-	Ignition on (no start of engine).

Fault criteria:

-	When system voltage is less than 4V for more than 2.1 s.

Dependents:

-

None.

System reaction to a fault:

-

None.

OK report:

-	When system voltage is more than 4V for more than 2.1 s.

Fault handling: (See section Fault handling III, other emissions-related components and functions for more information)

-

Type III.

Diagnostic help

This diagnosis is a check of the control module's internal measuring circuit. If a DTC is generated, it indicates that the measuring circuit is not working.

Check battery status following Battery check .

Checking the wiring

Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits. Observe the multimeter, diagnostic tool or test lamp during the check.