|
Programming
|
Programming covers
|
Description
|
Use
|
Idle Speed
|
Adjustment of idling speed.
|
-40 to 100 in steps of 20. The sent value is an offset value in relation to the standard value, 750 rpm.
|
For optimizing idling speed to customer specifications. If there is a problem with vibration at 750 rpm, it may only be necessary to try another idling speed.
|
Fuel consumption adjustment
|
Adjustment of information for fuel consumption.
|
The value can be adjusted between 0.5 and1.5 in steps of 0.1. Factory setting is 1.0.
|
The value displayed is a factor, which if reduced, will report a lower consumption to SID.
|
Oil Warning Level
|
Adjustment of filter time factor for oil level warning.
|
The value can be adjusted between 1.0 and 5.0 in steps of 0.2. Factory setting is 1.0.
|
Used only in specific cases. Used for cars when the customer remarks that the oil level warning is active despite the oil level being correct. The time until the level warning becomes active can only be increased. Ensure the oil level is correct and that the sensor is functioning properly before adjusting.
|
