P1413
Read the instructions below then
start the fault diagnostic procedure.
Symptom: CHECK ENGINE
The secondary air injection pump will not start.
Secondary Air Injection Relay Circuit. Open / Short to Ground.
Fault symptoms
|
-
|
The secondary air injection pump will not start.
|
Type of diagnosis
Continuous.
Conditions
The following conditions apply for this DTC:
|
•
|
Enable criteria: Engine speed greater than 0 rpm (engine running) for more than 60 seconds.
|
Diagnostic help
Fault diagnosis concerns an electrical fault in the connecting leads or in the secondary air injection pump relay.
Diagnostic tool functions related to this fault are:
|
•
|
Activation of SAI pump.
|
|
•
|
Activation of diagnostics, secondary air injection.
|
Check the wiring
Jiggle the leads and in-line connectors at various points and in different directions to detect any intermittent breaks or short circuits in the wiring. Observe the multimeter, test lamp or diagnostic tool while doing this.
