Rear silencer
Rear silencer |
To remove |
1. |
Raise the car.
|
2. |
Mark the underside of the exhaust pipe 95 mm from the joint where it is welded to the rear silencer.
|
3. |
Cut the exhaust pipe at right angles.
|
4. |
Remove the silencer.
|
5. |
Clean the cut to remove burrs and dirt.
|
To fit |
1. |
Fit the new silencer and adjust it so that it hangs straight.
|
2. |
Variants with visible tail pipe: Check that the tailpipe is centred in the cut-out in the bumper and that it is in line with the bumper profile.
|
3. |
Tighten the nuts on the clamps.
Tightening torque 70 Nm (52 lbf ft) |