Fuel pressure regulator, 4 cyl.
Fuel pressure regulator, 4 cyl. |
|
To remove |
Important | ||
In order to minimise any remaining fuel pressure, remove the fuel pump's fuse no. 19 when the car is running at idling speed. Switch off the ignition when the engine has stopped and fit the fuse. |
||
1. |
Remove the engine cover by undoing on snap fastener at a time, starting at the oil filler cap.
|
2. |
Unplug the connectors from the oxygen sensor and crankshaft position sensor.
|
3. |
Remove the vacuum hose.
|
4. |
Remove the bolt and open the clamp.
|
5. |
Remove the pressure regulator.
|
To fit |
Important | ||
Lubricate the O-ring with non-acidic vaseline before fitting. |
||
1. |
Manipulate in the pressure regulator.
|
2. |
Fold down the clip and fit the screw.
|
3. |
Fit the vacuum hose.
|
4. |
Plug in the connectors from the oxygen sensor and crankshaft position sensor.
|
5. |
Fit the engine cover
|