Temperature sensor, engine oil

/ 9-5 (9600) / 2003 / 2. Engine / PSG 16 (D223L) / Adjustment/replacement / Temperature sensor, engine oil

To remove

1.	Raise the car and remove the lower engine cover.

2.	Unplug the sensor.

3.	Place a receptacle under the engine.

4.	Remove the engine oil temperature sensor.

To fit

1.	Fit the engine oil temperature sensor with a new seal.

2.	Plug in the sensor.

3.	Fit the lower engine cover.

4.	Lower the car and top up with engine oil. See the recommendations in Link "Lubricating system .

5.	Check the oil level. Top up as necessary.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.