P0336
Read the instructions below then
start the fault diagnostic procedure.
Symptom: CHECK ENGINE lamp on.
Limp home.
Engine Speed Sensor Plausibility Fault with Pump Camshaft Sensor.
Fault symptoms
Conditions
The following conditions apply for this DTC:
|
•
|
When the difference between signals is greater than 800 rpm. Diagnosis is active above a crankshaft speed of 800 rpm and camshaft speed of 400 rpm.
|
Diagnostic help
Diagnosis detects mechanical faults, such as a loose sensor. The control module uses the pump speed x 2 as a substitute value.
