EVAP canister shut-off valve (vehicles without ORVR)
EVAP canister shut-off valve (vehicles without ORVR) |
To remove |
1. |
Raise the car.
|
2. |
Remove the right-hand front wheel.
|
3. |
Remove the wing liner from the wheel housing. Press in the plastic wing and fold it down to remove it.
|
4. |
Lower the close valve and unplug the connector.
|
5. |
Remove the clip and detach the connecting hose.
|
To fit |
1. |
Connect the hose to the valve.
|
2. |
Lift up the valve into position.
|
3. |
Spray the connector with Kontakt 61 (part no. 30 21 763). Plug in the connector.
|
4. |
Fit the wing liner and tighten the screws.
|
5. |
Fit the wheel.
Tightening torque: 110 Nm (80 lbf ft)
|
6. |
Lower the car.
|