SAAB WIS ONLINE

Fuel pump relay

Fuel pump relay

To remove


1. Remove the pedal bracket's cover by undoing the 3 screws and clip. Bend the cover down and carefully withdraw it. Mind the leads running to the data link connector and the wiring for the lighting.


2. Remove the screw securing the relay box.


3. Bend the relay holder downwards.

4. Carefully bend the relay catch aside and remove the relay.



To fit



1. Spray the contacts in the relay holder with Kontakt 61 (part no. 30 04 520) and fit the relay.

2. Bend the relay holder upwards to close the cover.


3. Tighten the screws to the relay box.

4. Replace the cables to the data link connector and diagnostic tool and the wiring to the lighting. Position the pedal bracket cover and tighten the 3 screws and clip.