P0444
Read the instructions below then
start the fault diagnostic procedure.
Symptom: CHECK ENGINE.
Possible smell of petrol or misfiring.
EVAP Purge Valve Circuit. Open / Short to Ground.
Fault symptoms
•
|
Possible smell of petrol or misfiring.
|
On-Board Diagnostics
Type of diagnosis:
-
|
Continuous. But interrupted when fault criteria fulfilled and will not restart until next driving cycle.
|
Enable criteria:
-
|
Engine running. Main relay voltage exceeding 10V. Output not active.
|
Fault criteria:
-
|
Output voltage below 2V. Conditions fulfilled within 10 periods that must occur within 60 s. (Normally, it takes about 1 s to generate the trouble code.)
|
Dependents:
System reaction to a fault:
OK report:
-
|
Enable criteria fulfilled. Fault criteria not fulfilled within 60 s.
|
Fault handling:
(See “Fault diagnosis, general” for more information.)
Diagnostic help
Fault diagnosis concerns an electrical fault in the connecting leads or in the valve.
Functions in the diagnostic tool related to the fault:
See also the description of activating functions under ”Fault diagnosis, general” for more information.
Checking the wiring
Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits. Observe the multimeter, diagnostic tool or test lamp during the check.