A/C relay
A/C relay |
When the A/C compressor is activated from the ACC or MCC and all other condition have been fulfilled, DICE will send bus information "A/C ON". The value is used by Trionic T7.
The control module then calculates the impending torque requirement of the compressor on the basis of the A/C pressure and then requests a corresponding increase in the air mass/combustion. After a short delay the control module grounds pin 4, which is connected to the A/C relay.
The control module activates the relay only after the engine has started.
Diagnostics |
• |
Diagnostic trouble code P1656 will be generated in the event of a break or short-circuit to ground.
|
• |
Diagnostic trouble code P1657 will be generated in the event of a short-circuit to B+.
|