Intake air sensor, 4-cyl (688)
| Intake air sensor, 4-cyl (688) |
| To remove |
| 1. |
Remove the upper engine cover.
|
|
| 2. |
Unplug the temperature/pressure sensor connector.
|
|
| 3. |
Remove the sensor.
|
|
| To fit |
| 1. |
Clean the sealing surfaces and fit the temperature/pressure sensor with new O-ring.
Tightening torque: 8 Nm (6 lbf ft) |
|
| 2. |
Plug in the sensor connector.
|
|
| 3. |
Fit the upper engine cover.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
