Changing belt pulley, V6 diesel

/ 9-5 (9600) / 2003 / 3. Electrical System / Charging systems / Adjustment/replacement / Changing belt pulley, V6 diesel

Removal

In the method described below, the generator has already been removed.

1.	Remove the cover on the belt pulley.

2.	Remove the belt pulley using special tools 83 95 709 and 83 95 832 . Note The belt pulley has a left-hand thread.

Refitting

1.	Fit the belt pulley using special tools 83 95 709 and 83 95 832 . Tightening torque: 80 Nm (59 lbf ft)

2.	Fit the cover on the belt pulley.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.